Product Details:
Payment & Shipping Terms:
|
| Product Name: | Vibrating Table Three Phase Horizontal Vibrator Motor External Electric Vibrator | Force: | 0.7KN |
|---|---|---|---|
| Power: | 0.07kw | Weight: | 4.2kg |
| Installation Size: | 62-74, 106 | Color: | Red Or Your Required |
| Material: | Aluminum Shell | ||
| High Light: | vibration motor products,variable vibration motor |
||
1. Your usage?
2.. The power? (KW)
3. The rotation speed? (rpm)
4. The quantity? (units)
1. The motor vibrator is special asynchronous vibrating source uniting motive power source and vibrating source into once,it and can be used to equip vibrating screen,vibrating feeder ,vibrating conveyor,vibrating ore drawing machine,vibrating shakeout machine ,vibrating platform(plain bumper),bulkhead vibration.ical, port and other industries.
2. Three phase vibration motor is designed as a high-end vibrating motor.It is available in several types with different specifications, while the most powerful one comes with an exciting force of 300 KN, and is driven by 30kw power.The rotor and stator are made of excellent silicon steel sheet.The heat dissipation is limited.High purity copper wire is used for better performance of the motor.The design of electromagnetic spec is suitable for vertical motor's operating characteristics. Be swift starting and stable operating.
1. Sieving equipment :linear vibrating sieve ,sieve mining ,coal washing sieve ,sieve abrasives,chemic sieve.
2. Conveying equipment:vibration conveyor ,conveyor drying vibration ,vibration vertical lifting machine.
3. Feeding equipment :vibratory feeder, vibrating hopper machine ,vibration mining machine ,vibration filling machine .
4. Other equipment:vibration fluidized bed, vibration platform.
| No. | Model | Force(KN) | Power(KW) | Weight(KG) | Installation Size | |
| A | B | |||||
| 1 | MV40/3 | 0.3 | 0.05 | 4 | 62-74 | 106 |
| 2 | MV60/3 | 0.7 | 0.07 | 4.2 | 62-74 | 106 |
| 3 | MV100/3 | 1 | 0.09 | 4.6 | 62-74 | 106 |
| 4 | MV200/3 | 2 | 0.15 | 6.8 | 62-74 | 106 |
| 5 | MV300/3 | 3 | 0.25 | 9.8 | 90 | 125 |
| 6 | MV400/3 | 4 | 0.27 | 10.3 | 90 | 125 |
| 7 | MV500/3 | 5 | 0.5 | 15.8 | 105 | 140 |
| 8 | MV700/3 | 7 | 0.59 | 16.5 | 105 | 140 |
| 9 | MV800/3 | 8 | 0.7 | 20.6 | 120 | 170 |
| 10 | MV1200/3 | 10 | 0.95 | 21.6 | 120 | 170 |
| 11 | MV1300/3 | 13 | 1.3 | 24.5 | 120 | 170 |
| 12 | MV1600/3 | 16 | 1.54 | 51.6 | 140 | 190 |
| 13 | MV1800/3 | 18 | 1.85 | 52 | 140 | 190 |
| 14 | MV2000/3 | 20 | 2.1 | 51.8 | 140 | 190 |
| 15 | MV2200/3 | 22 | 2.4 | 52.8 | 140 | 190 |
| 16 | MV2300/3 | 23 | 2.4 | 53.6 | 140 | 190 |
| 17 | MV3200/3 | 32 | 2.76 | 96.9 | 155 | 255 |
| 18 | MV4000/3 | 40 | 2.9 | 107 | 155 | 255 |
| 19 | MV5000/3 | 50 | 4 | 112 | 155 | 255 |
| 52 | MV60/3M | 0.7 | 0.08 | 4.5 | 62-74 | 106 |
| 53 | MV100/3M | 1 | 0.1 | 5.1 | 62-74 | 106 |
| 54 | MV200/3M | 2 | 0.13 | 6.8 | 62-74 | 106 |
| 55 | MV50DC-24 | 0.5 | 0.1 | 4.5 | 62-74 | 106 |
| 56 | MV200DC-24 | 2 | 0.16 | 6.5 | 62-74 | 106 |
Q1: Solution to High Temperature of Suspension Bearing of Spiral Feeder?
A: Improper azimuth installation, the treatment is to adjust the azimuth of suspension bearings.
B : Abnormal friction occurs when solid bulk materials are mixed into the machine. The treatment method is to tidy up foreign bodies and test run them to normal operation.
Q2: Solution of Vibrating Screen Fault?
1. The screening effect is not good. The following aspects should be checked and maintained.
(1) Blockage of screen hole or damage of screen surface.
(2) The moisture content of raw coal is too high.
(3) Screening feed is uneven.
(4) The material on the screen is too thick.
(5) The screen is not tight.
(6) Stop screening, clean screen or replace screen surface.
(7) The inclination angle of the shaker can be adjusted.
(8) Adjusting the feeding quantity.
(9) Reduce the amount of feed.
(10) Tighten the screen
2. Screen speed is not enough to drive belt loose should be checked and maintained from the following aspects.
(1) Bearing oil shortage.
(2) The bearing has dirt.
(3) too much oil is injected into bearings or the quality of oil does not meet the requirements.
(4) Bearing wear.
(5) Oil injection.
(6) Clean the bearing, replace the sealing ring and check the sealing device.
(7) Check the condition of oil injection.
(8) Replacement of bearings.
| Sales office:Floor 8, Bldg. 4, Jinyinxiandai City, Guangdian South Road, Jingsan Road, Jinshui Dist., Zhengzhou, Henan, China | |
| +86-371-86108011 | |
| market@cndasion.com | |
